Drill-doctor 750SP User Manual download pdf (Page 2)

US DEPARTMENT OF LABOR Form Approved Occupational Safety and Health

Administration OMB No. 44-R1367

MATERIAL SAFETY DATA SHEET

Required under USDL Safety and Health Regulations for Ship Repairing, Shipbuilding and Shipbreaking

(29 CFR 1915, 1916, 1917)

SECTION I

MANUFACTURES NAME:Professional Tool Manufacturing LLC

EMERGENCY PHONE NO: (541) 552-1301

ADDRESS: 210 East Hersey Street, Ashland, Oregon 97520

CHEMICAL NAME & SYNONYMS: Diazon-Electroplated Diamond/CBN Products, Diamond (uncoated),

Man-Made * Diamond, RVG, MBG, MBS Product Families, Standard Series and 300 Series Diamond

Micron Powder

TRADE NAME & SYNONYMS: Electroplated CBN Wheels, Electroplated Diamond Wheels

CHEMICAL FAMILY: Abrasive/Any Grade

FORMULA: N/A

SECTION II - COMPOSITION

CHEMICAL NAME: Nickel Industrial Diamond

REGULATED:* Yes No

CAS#: 7440-02-0 7882-40-3

AGIH / TLV: 1.0 mg/m3 10.0 mg/m3 (PNOC)

CARCINOGEN: Yes No

*Materials are regulated by OSHA 29 CFR 1910,1200, Hazard Communication Standard.

SECTION III - PHYSICAL AND CHEMICAL DATA

BOILING POINT (F) n/a MELTING POINT n/a

SPECIFIC GRAVITY n/a VAPOR PRESSURE n/a

VAPOR DENSITY n/a EVAPORATION RATE n/a

SOLUBILITY IN WATER n/a SOLUBILITY IN ALCOHOL n/a

SOLUBILITY IN OTHER SOLVENT n/a

PERCENT VOLATILE BY VOLUME (%) n/a

APPEARANCE AND ODOR: Solid, Clear, White To Yellow To Dark Crystals Silver Color.

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

FLASH POINT n/a

(METHOD USED) FLAMMABLE LIMITS LEL UEL

EXTINGUISHING MEDIA: n/a

SPECIAL FIRE FIGHTING PROCEDURES: n/a

UNUSUAL FIRE AND EXPLOSION HAZARDS: n/a

SECTION V - HEALTH, FIRST AID AND MEDICAL DATA

PRIMARY ROUTE(S) OF ENTRY:

Inhalation, Ingestion, Skin, Eye(s)

EFFECTS OF OVEREXPOSURE:

INHALATION: Difficulty in breathing (Dust from wheel use).

INGESTION: If dust, symptoms are variable.

SKIN: Irritation (especially if sensitive to Ni).

EYE(S): Irritation (from Ni or diamond particle).

FIRST AID AND MEDICAL INFORMATION:

INHALATION: Move to fresh air. Give oxygen if necessary.

INGESTION: Obtain medical attention.

SKIN: Wash thoroughly with water. Obtain medical help if necessary.

EYE(S): Flush thoroughly with water. Obtain medical assistance.

OTHER POTENTIAL HEALTH RISKS:

Nickel (Ni) is listed as a carcinogen. Avoid long exposure. Consult medical personnel for first aid

and medical information.

SECTION VI - CORROSIVITY AND REACTIVITY DATA

STABILITY: Unstable ( ) Stable (x)

POLYMERIZATION: May occur ( ) Will not occur (x)

INCOMPATIBILITY (Materials to avoid) n/a

HAZARDOUS COMPOSITIONS PRODUCTS: n/a

CONDITIONS TO BE AVOIDED: Contact with strong acids/caustics; enclosed areas.

SECTION VII - SPILL, LEAK AND DISPOSAL PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:

Normal clean up procedure

WASTE DISPOSAL METHOD: Waste will contain nickel. Dispose in accordance with all applicable

federal, state, and local regulations.

SECTION VIII - PERSONAL PROTECTION INFORMATION

RESPIRATORY PROTECTION:

Respiratory protection as needed see OSHA 29 CFR 1910.134

VENTILATION: LOCAL EXHAUST: strongly preferred

MECHANICAL (GENERAL): Use only if adequate to maintain below TLV’s.

PROTECTIVE GLOVES: As desired by user.

EYE PROTECTION: Recommended see OSHA 29 CFR 11910.215

OTHER PROTECTIVE EQUIPMENT: Use standard precautions for grinding operations.

SECTION IX - STORAGE AND HANDLING PROCEDURES

NORMAL STORAGE AND HANDLING: Store in clean, dry area, away from chemicals.

NORMAL USE: Use adequate ventilation (see Section VIII)

PAGE (1) FORM OSHA-20

IMPORTANT SAFETY INSTRUCTIONS

REMEMBER, FOR YOUR OWN SAFETY, READ

INSTRUCTION MANUAL BEFORE OPERATING TOOL. Wear

Eye Protection. Never touch internal parts of the sharpener when

the sharpener is on. The rotating diamond grinding wheel can cause

injury. Use caution when replacing the grinding wheel. Follow

instructions entitled “Replacing The Grinding Wheel” in this

Instruction Manual. Regularly empty accumulated grinding dust.

Follow instructions entitled “Drill Doctor Maintenance” in this

Instruction Manual.

WARNING : WHEN USING ELECTRIC TOOLS, BASIC SAFETY

PRECAUTIONS INCLUDING THE FOLLOWING SHOULD

ALWAYS BE FOLLOWED TO PREVENT THE RISK OF FIRE,

ELECTRIC SHOCK AND PERSONAL INJURY.

1. KEEP GUARDS IN PLACE

2. REMOVE WRENCHES. Form a habit of checking to see that the

wrench is removed from tool before turning on.

3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite

accidents.

4. DO NOT USE IN DANGEROUS ENVIRONMENT Don’t use

power tools in damp or wet locations, avoid exposure to rain.

5. STORE EQUIPMENT in a safe place when not in use.

6. DON’T FORCE TOOL. It will do the job better and safer at the rate

for which it was designed.

7. USE RIGHT TOOL. Don’t force tool or attachment to do a job it was

not designed for.

8. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if

cutting operation is dusty. Everyday eyeglasses only have impact

resistance lenses, they are NOT safety glasses.

9. MAINTAIN TOOL WITH CARE. Keep tools sharp and clean for best

and safest performance.

10. DISCONNECT TOOLS from the power supply before

servicing,when cleaning accessories.

11. AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF “

position before plugging in.

12. USE RECOMMENDED ACCESSORIES.

13. CHECK FOR DAMAGED PARTS. Before further use of the tool, a

guard or other part that is damaged should be carefully checked to

assure that it will operate properly and perform its intended function.

Check for alignment of moving parts, binding of moving parts,break-

age of parts, mounting and any other conditions that may affect its

operation. A guard or other part that is damaged should be properly

repaired or replaced.

14. NEVER LEAVE TOOL RUNNING UNATTENDED.

15. USE PROPER EXTENSION CORD. Make sure extension cord is in

good condition. When using an extension cord be sure to use one

heavy enough to carry the current the Drill Doctor® will draw. An

undersized cord will cause a drop in line voltage, resulting in a loss of

power and/or overheating. Maximum cord length (5O ft), minimum

gauge (16). The smaller the gauge the heavier the cord.

DRILL DOCTOR

WARRANTY

Professional Tool Manufacturing LLC warranties your Drill

Doctor® to be free of defects due to workmanship and

design for 1 year following the first day of in service use.

For warranty service see warranty card instructions or con-

tact your authorized Drill Doctor

dealer.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Drill-doctor 750SP User Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Drill-doctor 750SP